Lay the inner tent pods on the ground and fold them in half, lengthways. Fold it in half again and compare to the width of the tent bag, to ensure its fit. Tent pods should be removed from the tent and folded separately as if they are still attached to the tent, it will not fold down small enough.
Hold flysheet by grabbing the roof and lay out flat on the ground, leave a door partially open to allow air to escape. Fold in each outside edge into the centre and repeat this until it is roughly the same width as the bag. Continue to fold the outer tent all the time flattening it down and letting the air out until it is small enough to fit into the case, place the inner pods on top of the outer tent inside the bag.